Maintenance; Replacing The Battery; Cleaning; Calibration - Chauvin Arnoux PAC 20 Mode D'emploi

For maintenance, use only specified spare parts. The
manufacturer will not be held responsible for any ac-
cident occurring following a repair done other than by its
After Sales Service or approved repairers.

5.1/ REPLACING THE BATTERY

- Completely disconnect the clamp from the circuit to be measured
and the measurement instrument it is connected to.
- Unscrew the tool release screw holding the cover of the battery
compartment.
- Replace the 9 V battery (type 6LF22, 6LR61 or NEDA 1604).
- Replace the cover of the battery compartment.

5.2/ CLEANING

Keep the jaw faces and mechanism perfectly clean.
The body of the clamp should be cleaned with a cloth moistened
with soapy water.
Rinse with a cloth moistened with clean water.
Never expose the clamp to running water.

5.3/ CALIBRATION

It is essential that all measuring instruments are regu-
larly calibrated.
For checking and calibration of your instrument, please contact
our accredited laboratories (list on request) or the Chauvin Arnoux
subsidiary or Agent in your country.

5.4/ REPAIRS

Repairs under or out of guarantee: please return the product to
your distributor.

5/ MAINTENANCE

15