Best Polar Mode D'emploi page 13

Cleaning the grease filters
WHEN TO CLEAN IT: clean it at least every 2 months to
prevent the risk of fire.
HOW TO REMOVE THE FILTERS: push the catch near
the handle towards the rear of the hood and pull the
filter downwards
HOW TO CLEAN THE FILTERS: hand wash or in the
dishwasher using a neutral detergent. If washing in the
dishwasher, possible discoloration of the filters does not
in any way compromise their functioning.
Replacing the charcoal filter (P)
(for filtering version only)
WHEN TO REPLACE IT: replace it at least every 6
months.
HOW TO REMOVE IT: if using the hood in the filtering
version, the charcoal filter has to be replaced. To remo-
ve it, push the catch inwards and remove the charcoal
filter from its seat.
replacing the lamps
- To change the halogen lamps open the cover levering
from the proper slots.
- Replace it with a lamp of the same type.
WArNING: do not touch the new lamp with bare
hands.
MAlFUNcTIoNS
If something appears not to be working properly, do the
following simple checks before calling Technical Servi-
ce:
• If the hood is not working:
Check that:
- The power has not been disconnected.
- A speed has been selected.
• If the hood performs inefficiently:
Check that:
- The motor speed selected is sufficient for the amount
of smoke and vapours released.
- The kitchen is sufficiently ventilated to allow air inta-
ke.
- The charcoal filter is not worn (hood in filtering ver-
sion).
• If the hood has turned off during normal functioning:
Check that:
- The power has not been disconnected.
- the omnipolar disconnection device has not tripped.
P
Components not provided with the product
eN
13