Interior Light; Temperature Power-Off Memory - Haier WS137GDAI Manuel D'utilisation

Use
3.
Humidity Display
Humidity display zone will display the humidity inside your wine cellar in real time.
4.

Interior Light

•
To complement the look of your wine collection, a soft light has been built into the wine cella
Simply push the "Light" button and the light comes on, push again for
efficienc, leave light off when not viewing your collection.
•
When door is open the light will go on. Upon closing the
5.
Circulation Inside Cellar
Press "Air Cycle" briefly to start up the fan inside the cellar in order to make the temperature
more uniform.
6.
Celsius/Fahrenheit Conversion
Press "Air Cycle" and hold it for 3 seconds in order to activate the conversion between
Fahrenheit.
7.
Power
In the initial status, the power key is in on. If it is not locked, all of the key icons are on. After holding
the power key for 3 seconds, the main power will turn off (power for all electrical devices inside will
be cut off and the whole appliance will be in standby) and the power key will be half-on. If the device
is off, the power can be turned on by holding the power key for 3 seconds, and then all icons on the
display screen will turn on. After the operation is stopped for 30 seconds, the display screen will be
locked. If the screen is locked, the power key icons are half-on.
8.
Low-Temperature Compensation
This wine cellar has a low-temperature compensation function so as to ensure the stability of the
storage temperature of the wine.If the ambient temperature is lower than the set temperature,
the temperature inside the cellar will fall accordingly. If the temperature inside the cellar is lower
than the shutdown temperature by 2°C(4°F), the cellar will automatically enable the
low-temperature compensation function in order to heat the cellar. If the temperature inside
reaches the set temperature, the low-temperature compensation function will be disabled.
9.
Temperature Power-Off Memory
In case of a power outage, the cellar will automatically save the set
recovery,it will run based on the temperature set before the power outage while other functions
will return to the default status.
20
off. For maximum energy
door, the light will go off.
temperature.After power
EN