Program Tracks - LENCO SCD-430RD Mode D'emploi

Press and hold the FOLD+/+10 or FOLD-/-10 button more than
1 second to skip next/previous folder. Until the desired folder number
appears on the LCD display, then release the button.

PROGRAM TRACKS

Programming tracks of disc are possible when playback is stopped. Up
to CD 20 tracks/MP3 99 tracks can be stored in the memory in any
order.
1. In stop mode, press the PROG./P-MODE button, the "PROG" will
flash and the P01 indicator will be on.
2. Press the CD SKIP/SEARCH FORWARD button to select the first
desired track to be programmed.
3. Press the PROG./P-MODE button to enter. The display changes to
show P02.
4. Repeat steps 2 & 3 to store other desired tracks until all tracks are
programmed.
5. Press the PLAY/PAUSE/
programmed track.
6. Press the STOP button to stop program playback.
To Erase the Memory (Program)
To clear the program, you have two options:
1. Press the STOP button when the disc is stopped, or
2. Open the CD compartment lid, program will be erased.
REPEAT
To Repeat a Single Track
1. Press the PROG./P-MODE button once in play mode, "
flash on the display. The current track will be played repeatedly
until the STOP button is pressed
2. Press the PROG./P-MODE button once more to cancel.
To repeat all the Tracks
1. Press PROG./P-MODE button twice in play mode, " " shows
steady on the display, all tracks on the disc will be played
repeatedly until the STOP button is pressed.
2. To cancel repeat play, press the PROG./P-MODE button once more.
button to start playback from the first
" will