Random Play; Aux-In Operation - LENCO SCD-430RD Mode D'emploi

To repeat current Directory (for MP3 only)
1. Press PROG./P-MODE button twice in play mode, "
shows steady on the display, the current directory will be played
repeatedly until the STOP button is pressed.
2. Press the PROG./P-MODE button once to cancel.

RANDOM PLAY

Press the PROG./P-MODE button in play mode till the "RDM" shows
steady on the display, the random play will start from next track
automatically, until all tracks are played over and then stop. Press the
PROG./P-MODE button once to cancel.
INTROSCAN PLAY (for CD disc only)
Press the PROG./P-MODE button in play mode till the "INTRO" shows
steady on the display, the unit will start to play the first 10 seconds of
music of each track, until all tracks are played over and then stop.
Press the PROG./P-MODE button once to cancel.

AUX-IN OPERATION

This unit has provided special AUX-IN jack, through this jack other
audio sources can be connected to this unit and be amplified.
1. Set the FUNCTION switch to CD/MP3/AUX position.
2. Connect the audio cable into the AUX-IN jack and the other end
connects to the AUDIO OUT jack of the external audio source. The
unit will change to AUX mode automatically.
3. Adjust the volume of the main unit to your desired level.
4. Press PLAY of the external audio source (e.g. MP3 player) to start
playback.
COMPACT DISC MAINTENANCE
1. Always use a compact disc bearing the mark as shown.
2. Notes on handling discs
⚫ Removing the disc from its storage case and loading it.
⚫ Do not touch the reflective recorded surface.
FOLD"