Declaration Of Conformity - Kobra 400 HS Automatic Oiler Serie Mode D'emploi

If you have any problems with your shredder, check the symptoms and remedies described below.
If you are unable to solve the problem this way, contact your nearest Kobra dealer.
Do not open the head of the shredder to attempt to repair it yourself. You could get a serious electric shock and
invalidate your warranty.
PROBLEM WHAT HAPPENS
The shredder - The ENERGY SMART Optical
fails to start Illuminated Indicator (3) does
not come on.
The Stand-by light (1) does
not come on.
- The red light (2) comes on.
- The ENERGY SMART Optical
Illuminated Indicator (3) and
Stand-by light (1) come on.
- When paper is inserted into
the throat the machine fails
to start;
The shredder - Optical Illuminated Indicator
never stops (3) on, cutting blades
operating.
Significant - Capacity reduced compared
reduction of with capacity when cutting
shredding blades are oiled.
capacity Red light (2) flashing.
Compliant with - LVD Directive (2014/35/UE)
- RoHS Directive (2011/65/EU )
- CEM Directive (2014/30/UE)
The manufacturer ELCOMAN SRL
VIA GORIZIA,9
Declares herewith that the following paper shredders comply with the standards of the LVD Directive 2014/35/UE
- KOBRA series: Kobra 400
Standards applied are :
EN 60950-1 :2006/A11 :2009/A1 2010/A12 :2011
EN 55014-1 :2006
EN 55014-2 :1997+A1 :2001
EN 61000-3-2 :2006
Bovisio Masciago, 15.01.2020
A.DE ROSA
T O
EchnicAl fficE
TROUBLESHOOTING
CAUSE
- Button position (G)
- Lid (A) not closed properly.
- Bag full (E).
- Motor in heat protection
mode.
- Cable not connected properly.
- No electrical power.
Material and/or dirt deposited
on photo cells (5) or (5a).
- Oil in container (P) has run
out.

DECLARATION OF CONFORMITY

20813 BOVISIO MASCIAGO (MB) – ITALY-
EN 61000-3-3 :1995 + A1(2001) + A2(2005)
EN 61000-4-2 (1995) + A1(1998) + A2(2001)
EN 61000-4-3 (2006)
EN 61000-4-4 (2004)
11
ACTION
- Turn button to " I " position.
-Close the lid properly.
- Empty the bag.
- Wait 15 minutes for motor to cool
down.
- Check if machine is plugged in
correctly to power socket.
- Check if the socket is switched on.
Remove deposit from photo cells.
- Replace oil container (P).
EN 61000-4-5 (2006)
EN 61000-4-6 (2007)
EN 61000-4-8 (1993) + A1 (2001)
EN 61000-4-11 (2004)
Kobra Serie 400HS Auto Oiler