Accessories; Declaration Of Conformity Ce - Kobra 260 Mode D'emploi

ACCESSORIES

COMPUTER FORMS SHELF
Kobra shredders are designed to be used in coniuction with
a computer forms shelf (E) which allows easy shredding of
continuous computer paper.
Insert the two rear sides of the housings located on the back
side of the top cover for KOBRA 260-300-390-400 (Fig.1-3).
The shelf of KOBRA 385 can be mounted by inserting the
two sides of the shelf into the machine. Push the shelf into
the housing until it stops in its final positions as shown in
Fig. 2.
KOBRA 385 S4 and KOBRA SS4
CABINET WITH BELLOW (fig. 6)
- Installation
KOBRA is also designed to be used in conjunction with a
special cabinet which is equipped with a front sliding bel-
lovn (6a).
By positioning the machine on the cabinet as shown in Fig.
6. KOBRA becomes an attractive compact castor mounted
shredder. The plastic bag metal holder is also securing the
machine to the cabinet. When the plastic bag holder is in-
serted in its position the machine cannot be released from
the cabinet.
Compliant with:
The manufacturer ELCOMAN SRL
VIA GORIZIA,9
Declares herewith that the following paper shredders comply with the standards of the Directive LVD 2014/35/UE
- KOBRA series : Kobra 260 , 300 , 385 , 390 , 400
Standards applied are:
EN 60950-1 :2006/A11 :2009/A1 :2010/A12 :2011
EN 55014-1 :2006
EN 55014-2 :1997+A1 :2001
EN 61000-3-2 :2006
EN 61000-3-3 :1995+A1(2001) + A2 (2005)
EN 61000-4-2(1995)+A1(1998) + A2 (2001)
Bovisio Masciago, 17.01.14
A.DE ROSA

DECLARATION OF CONFORMITY CE

- Directive LVD 2014/35/UE
- Directive 2011/65/RoHS
- Directive 2004/108/CEM
20813 BOVISIO MASCIAGO (MB) – ITALY-
- Emptying the plastic bag by operating the bellow (fig. 6).
The cabinet of the KOBRA is equipped with a sliding bellow
which allows easy emptying of the plastic bag.
To open the bellow, first press down the two front handles
(6b).
To close the bellow just lift the bellow up by the two front
handles until the magnetic closing.
ATTENTION:
The bellow can be cleaned by using a soft cloth with water
and soap. Do not use anysolvent or chemicals.
CABINET WITH FRONT DOOR (STANDARD CABINET) (fig. 2).
KOBRA 385 S4 and 385 SS4 can be also used in conjuction
with a standard cabinet equipped with front door.
Place the shredder head on standard cabinet as shown in
Fig. 2. DESK MOUNTING ASSEMBLY (Fig. 5)
KOBRA can also be operated with a unique desk mounting
assembly which allows to hang the machine at a desk or at
shelf, either in the office or in the warehouse.
~ Installation
Open the desk-mounting assembly frame (5a) and position
it on the working desk or shelf as shown in fig. 5.
Insert the machine as shown in Hg. 5 and insert the plastic
bag holder with the plastic bag in place.
Operate the machine as a desk top shredder.
EN 61000-4-3(2006)
EN 61000-4-4(2004)
EN 61000-4-5(2006)
EN 61000-4-6(2007)
EN 61000-4-8 (1993) + A1(2001)
EN 61000-4-11 (2004)
9
ETSI EN 301 489-3 v 1.4.1 (2002-08)
ETSI EN 301 489-1 v 1.6.1 (2005-09)
Kobra Serie 260, 300, 385, 390, 400 Manuale