Dishwasher Setup; Water Softening System - Bosch SGV68U53UC Guide D'utilisation

Dishwasher Setup

Water Softening System

Your dishwasher requires soft water to ensure proper washing results
and is equipped with an internal water softening system. However, if
you have a household water softening system, the internal system pro-
vided is not needed.
For the water softening system to function properly, it will need to use
dishwasher water softening salt. The amount of salt dispensed can be
set from "H:00" to "H:07". Salt is not used at H:00 (default factory set-
ting). The amount of salt required depends on the degree of hardness of
your tap water. See Table 1.
1
Turn the unit on using the [ON/OFF] button.
2
Hold down the "A" button (see Figure 1) and press [Start/
Resume] until the display indicates "H:00".
3
Release both buttons and press the "C" button to select the
desired setting.
4
Save the selected setting
by pressing [Start/
Resume] .
6
Figure 1