Dishwasher Setup - Bosch SGE53U5 UC Série Guide D'utilisation

Dishwasher Setup

Water Softening System
Your dishwasher requires soft water to ensure proper washing results
and is equipped with an internal water softening system. However, if you
have a household water softening system, the internal system provided
is not needed.
For the water softening system to function properly, it will need to use
dishwasher water softening salt. The amount of salt dispensed can be
set from "H:00" to "H:07". Salt is not used at H:00 (default factory set-
ting). The amount of salt required depends on the degree of hardness of
your tap water. See Table 1.
1
Turn the unit on using the [ON/OFF] button.
2
Hold down the "A" button (see Figure 1) and press [START] until
the display indicates "H:00".
3
Release both buttons and press the "C" button to select the
desired setting.
4
Save the selected setting by pressing
[START] .
Using the water hardness test strip
6
Figure 1