Wagan Tech FRED Light Guide D'utilisation page 4

FRED Light by Wagan Tech
™
SPECIFICATIONS
Unit Size
Unit Weight
LED Type
LED Quantity
Light Patterns
Visibility
Battery Requirements
Material
Load Capacity
Storage Temperature
Construction
USAGE
If your unit comes with batteries installed, there is battery separator
that needs to be removed prior to use. See Battery Replacement
section for instructions.
• To turn unit ON: Click the power button.
• To change mode: Press the power button gently until desired flash
pattern is found.
• To turn unit OFF: Click the power button.
3
®
4.0 in. x 4.0 in. x 1.3 in.
0.4 lbs
12,000 mcd
15
10
360° up to 1 mile
3x AAA per unit
Polycarbonate (PC)
Thermoplastic Elastomer (TPE)
0.5 ton
-40°F to 140°F
Antislip Casing, Magnetic Base,
Shatterproof, Floats, Rainproof (IP55)