Battery Replacement - Wagan Tech FRED Light Guide D'utilisation

FRED Light by Wagan Tech
™

BATTERy REPLACEMEnT

To replace the batteries:
1. unscrew the two screws completely on the bottom of the unit.
2. note the orientation of the two tabs at top.
3. Pull firmly on the plastic tabs to remove the cover plate.
nOTE: Initial seal may be difficult to open.
4. Replace the batteries in the proper orientation shown on the battery holder.
5. Align the two tabs on the battery cover to the notches on the outer
enclosure. Cover will not seal properly if not aligned to the notches.
6. secure the screws to ensure proper seal.
Pull firmly on
plastic tabs
4
®
www.wagan.com
Pull firmly on
plastic tabs