Adjusting The Date And Time; Set A Temperature Correction - Smartwares SHS-53002-EU Manuel D'utilisation

decrease in temperature of 1.5 °C is detected within 3 minutes, the thermostat head switches
to a low temperature. The smart thermostat head remains at this low temperature for a certain
amount of time.
1 Keep the Menu button pressed until 'Pro' appears on the display.
2 Choose 'AEr' by turning the dial button.
3 Press the OK button.
On the display, the minutes flash during which the temperature remains low.
4 Set the number of minutes by turning the dial button.
5 Press the OK button.
On the display the temperature is flashing. The smart thermostat head switches to
this temperature when ventilation has been detected.
6 Set the temperature by turning the dial button.
7 Press OK to confirm.
7.1.7

Adjusting the date and time

1 Keep the Menu button pressed until 'Pro' appears on the display.
2 Choose 'dAT' by turning the dial button.
3 Press the OK button.
The year appears.
4 Turn the dial button to set the year.
5 Press OK to confirm.
6 Turn the dial button to set the month.
7 Press OK to confirm.
8 Turn the dial button to set the day.
9 Press OK to confirm.
10 Turn the dial button to set the hour.
11 Press OK to confirm.
12 Turn the dial button to set the minutes.
13 Press OK to confirm.
The date and time have been adjusted. Press the Menu button to return to the
home screen.
7.1.8

Set a temperature correction

If you use the smart thermostat head in combination with a wall thermostat, then the wall
thermostat determines the room temperature. It is thus possible that it is colder or warmer
elsewhere in the room. To compensate for this, a temperature variance can be set.
For example: when your wall thermostat measures 22 degrees and the smart thermostat head
measures 24 degrees, then you can adjust the smart thermostat by 2 degrees.
Proceed as follows:
1 Keep the Menu button pressed until 'Pro' appears on the display.
2 Choose 'tOF' by turning the dial button.
User manual – wireless climate control kit 27