Quick Start Guide; Safety Instructions - nedis WIFIHTPL20FWT Guide De Démarrage Rapide

a

Quick start guide

Panel
convection
heater
For more information see
the extended manual online:
ned.is/wifihtpl20fwt
Intended use
The product is intended for indoor use only.
This product is only suitable for well insulated spaces
or occasional use.
It can be used in wet and damp environments.
Any modification of the product may have
consequences for safety, warranty and proper
functioning.
Main parts (image A)
1
Panel convection
heater
2
Remote control
3
Plug
4
Power switch
Interface (image B)
1
Display
2
LED indicator
3
On/off button
4
Mode button
5
+ Button
6
Program button
7
Time button
8
- Button
9
On/off button
10
Operating mode
button
11
Window open button
12
Time button
13
+ Button
14
- Button
15
Day of the week
WIFIHTPL20FWT_MAN_COMP_0919_(19350 1422)_v02.indd 4
WIFIHTPL20FWT
5
Screw for wall mount
6
Anchor
7
Foot with wheels
8
Screw for foot with
wheels
16
Timer
17
Wifi
18
Child lock
19
Temperature
20
Heating interval
display
21
Time
22
Heating on/off
indication
23
Programming mode
24
Comfortable mode
25
Eco mode
26
Anti-frost mode
27
Window open mode
28
Heating display

Safety instructions

- WARNING
• Only use the product as described in this manual.
• Do not use the product if a part is damaged or
defective. Replace a damaged or defective device
immediately.
•
This product may only be serviced by a qualified
technician for maintenance to reduce the risk of
electric shock.
•
Disconnect the product from the electrical outlet
and other equipment if problems occur.
• Do not drop the product and avoid bumping.
• Close supervision is necessary when the product
is used by or near children, animals or infirm
persons. Do not allow children to play with it or
touch it.
•
Do not use the product where splashing of water
might occur, e.g. bathroom, swimming pool or
close to a washbowl.
• Do not use the product in rooms where
flammable liquids or gases are used or stored.
• Do not use the product in dusty environments.
• Place the product on a stable and flat surface.
•
Make sure that the electrical supply in your area
matches a voltage of 220 – 240 VAC and a
frequency of 50 Hz.
•
Keep away heat-deformable, discolouring or
deteriorating products.
• Avoid direct sunlight.
• Make sure that no other high current appliances
are plugged into the same circuit with your
product. Overloading may occur.
•
Do not place near other heat sources.
•
Connect to a grounded socket only.
•
Do not place the heater directly under a wall
socket.
• Do not use the product on a mobile socket.
• Do not immerse the product in water.
• Do not subject the product to water jets.
• Do not obstruct or cover the product's air inlet or
outlet grid.
•
Do not insert any objects into the product.
•
Do not use solvents to clean the product.
•
Only plug the cable into a wall outlet. Do not use
extension cords.
• Keep the power cable away from the outlet grid.
• Do not use the product when the cord or plug is
damaged.
4
30-8-2019 12:25:27