Weekly maintenance
Note: If using on consecutive days, please carry out maintenance by applying the following procedure once
a week. If this type of maintenance is not conducted, scale may form on the inside and shorten the life of the
equipment or cause a breakdown. Moreover, if the device continues to be used with no maintenance, it may
lead to the growth of bacterial and mould/bad odour.
Switch the power button to OFF and remove the
1
power plug;
Remove the top cover and water tank from the device.
2
Remove the remaining water in the water tank and at
3
the bottom of the device.
Add dishwashing detergent to a soft sponge for dishes
4
and wash the water surface and water tank.
Rinse the water tank well so that no washing up liquid
5
remains and dry the water tank thoroughly.
Gently clean the surface of the ultrasonic membrane
6
with a soft, dry cloth.
After soaking a soft cloth in lukewarm water, wring and
7
wipe off the dirt on the bottom and sides.
Attention: Please do not use metal scourers, melamine
sponges, polishing powers, or solvents like benzene, thinner,
alcohol or other.
14
DUU15045_Handleiding-TAG-Universeel.indd 14-15
Maintenance before storing
Please conduct the following maintenance before
storing the device:
Follow the same steps under 'Weekly
1
maintenance'
Dry each component before assembling it
2
Check that each component has fully dried,
3
then assemble the device and store it.
Spare parts
Spare parts and accessories can be requested at
the point of purchase or local distributor.
15
14-04-17 15:46