3. Functions
Note: see product overview (chapter 1) for
reference.
Top cover
1
The structure is such that the evaporated steam
is spread efficiently. Please always leave this
cover on during use. When removing the cover
please lift it straight up.
Max. water supply indicator
2
If the supply water in the water tray exceeds a
certain amount, the water supply stop indicator
becomes visible. If the water tray is full, the
water supply stop indicator signals this.
Note: Even if the indicator lowers and
disappears, there is still water left in the water tray.
It can continue to be used until the power / water
supply indicator starts to flash red. Please supply
water when the power / water supply indicator
lamp starts to flash red.
Water supply entrance
3
Water enters the water tray within the main body
from here. Once the water tray is full all of the
water supply stop indicators are displayed and
water supply entrance is closed.
10
Attention: When the water supply entrance is
closed, please do not supply water forcibly. It can lead
to water getting into parts other than the water tray,
which can result in the breakdown of the main body.
Power plug
4
Please directly connect the plug to a power
socket on the wall.
Power / mist output switch
5
If you turn the switch to the setting 'humidifier II'
(maximum) or 'I' (minimum), the device switches
on and starts humidifying. If the switch is turned
to OFF the power turns off.
Note: As this device uses evaporation, there is no
visible mist during humidification.
Power / water supply indicator
6
It lids white when the power is connected and
flashes red when water needs to be supplied.
Aromatics tray
7
Use this tray to add aromatic oils.
Note: Aromatic oils are not included.
Water tray
8
Stores the water poured in through the top of
the device.
4. Maintenance
Important: Be sure to remove the power plug
from the outlet before carrying out maintenance.
Important: Do not soak immerse the power
plug or the device in water.
Important: We recommend daily maintenance
to prevent the growth of bacteria and scale inside
the water tank.
Daily maintanance
Please replace the water in the water tray with
fresh tap water every day. Dirt in the water or scale
can trigger the growth of bacteria or mould, leading
to bad odour or damage to health.
Please follow the steps below every day after use:
Switch the power button to OFF and remove
1
the power plug;
Remove the top cover from device and remove
2
the filter.
Attention:: When removing the top cover and
the filter, please lift them straight upwards.
Remove the water tray from the device and
3
throw away the water remaining in the water
tray.
Attention:The fan may continue to rotate even
when the power is switched off. Please check that it
has fully stopped rotating. Please do not touch the
rotating fan under any circumstances.
Attention:Please return the water tray to the
device correctly. If the water tray is not correctly
placed, power does not connect properly.
11