Technical Specifications - LENCO SB-080 Mode D'emploi

Power Supply
Power output
Driver Unit
Input impedance
S/N
Frequency Response
Distortion
Input Sensitivity
bluetooth Version
Dimension (mm)
GUARANTEE
Lenco offers service and warranty in accordance to European law, which means that in
case of repairs (both during and after the warranty period) you should contact your
local dealer.
Important note: It is not possible to send products that need repairs to Lenco directly.
Important note: If this unit is opened or accessed by a non-official service center in any
way, the warranty expires.
This device is not suitable for professional use. In case of professional use, all warranty
obligations of the manufacturer will be voided.
DISCLAIMER
Updates to Firmware and/or hardware components are made regularly. Therefore
some of the instruction, specifications and pictures in this documentation may differ
slightly from your particular situation. All items described in this guide for illustration
purposes only and may not apply to particular situation. No legal right or entitlements
may be obtained from the description made in this manual.

TECHNICAL SPECIFICATIONS

Version: 5.0 Range:up to 10m
10
SMPS 110V-240V ~ 50/60Hz
20W*2+40W=80W R.M.S.
2"*2+2.25"*2
8Ω*2+3Ω*2
≥ 72dB
80Hz-20Khz
</=0.5% (1K/1W)
800mV±50mV
70H*78D*900L mm