Troubleshooting; Battery Charger - Husqvarna K 535i Manuel D'utilisation

Maintenance
Blow through the product and battery soft with compressed air.
Keypad
Problem Cause
Warning indica- Temperature
tor flashing. deviation.
Overload. Cut-
ting attachment
is clogged.
The power trig-
ger and the
start button are
pressed at the
same time.
Green LED Low battery
flashing. voltage.
Warning indica- Service.
tor is on.
Battery
Problem Cause
Warning indica- The battery is
tor flashing. not charged.
Temperature
deviation.
To high volt-
age.
Warning indica- Battery cells
tor is on. difference is
too much (1V).

Battery charger

Problem
Warning indicator flashing.
Warning indicator is on.
745 - 008 - 12.11.2018

Troubleshooting

Solution
Let the product to cool down.
Clean the cutting attachment.
Release the power trigger.
Charge the battery.
Turn to your servicing dealer.
Solution
Charge the battery.
Use the battery in an environment where temperature are between -10 °C/14°F
and 40°C/104°F.
Check that the voltage on the battery is the same as the voltage on the rating
plate on the product. Remove the battery from the battery charger.
Turn to your servicing dealer.
Casue
Temperature deviation.
Before
Weekly
use
Solution
Use the battery an environment
where temperatures are between
5°C/41°F and 40°C/104°F.
Turn to your servicing dealer.
Monthly
X
21