Technical Data - HAEGER Elan IX OH-009.006A Mode D'emploi

of overheating, eg. something covering the heater. Check for damage to the
appliance, the cord and the plug. If there is no damage, plug the unit back in
and switch it on as described above. If the heater still does not turn on, please
contact Customer Service for assistance.
Cleaning your oil-filled heater
1. Always remove the plug from the socket-outlet and allow the heater to
cool down before cleaning it.
2. Wipe the exterior surface of the heater occasionally with a soft damp cloth
(not dripping wet) and dry the exterior surface before operating the
heater.
WARNING:
DO not immerse the heater in water.
DO not use any cleaning chemicals such as detergents and abrasives.
DO not allow the interior to get wet as this could create a hazard.
Storing your oil-filled heater
1. Save the box for off season storage.
2. Clean the heater following the cleaning instructions above.
3. Remove the wheel base assemblies.
4. Place the heater, and wheel assemblies in the original box, and store in a
cool and dry place.
5. If you choose to store your heater fully assembled, be sure to cover it to
protect it from dust.

Technical Data

Model: .............................. OH-009.006A / OH-011.007A
Power supply: ................... 230V~, 50 Hz
Power consumption: ....... 2000W / 2500W
Protection class: .............. Ι
Instructions for use
English
5