Overview Of The Components - HAEGER Elan IX OH-009.006A Mode D'emploi

Overview of the components

1. Handle
3. Thermostat control
5. Oil filled Fins
7. Wheel
Assembly
Remove the heater and all the accessories from the carton.
1. Turn the radiator upside-down.
2. Fit the wheels assemblies onto the radiator by placing the U-shaped bolts
between the outermost fins on each side of the radiator.
3. Please fit the wheel bases as the picture. Other position may affect the
stability of the radiator.
4. Securely fasten the wheels assemblies onto the radiator by screwing the
wing nuts onto the bolts.
5. Turn the radiator up right.
6. WARNING: Only operate the radiator in normal upright position with wheels
assemblies attached to the bottom (wheels on the bottom, controls on the
top), any other position could create a hazardous situation.
Where to locate the appliance
– Position the radiator on the floor at least 90cm away from the wall and any
other objects such as furniture, curtains or plants and under the coldest
window in the room or wherever else you want.
Instructions for use
2. Pilot Lamp
4. Power settings switch
6. Cord storage
8. Wheel base
English
3