Online Help; Anti-Passback - CDVI TERENA Manuel D'installation

ONLINE HELP

TERENA - TERENA16
Web Based Access Control
ParkiNG Status.
- A relay can be activated when the parking is full with a C1410S relay module. The relay module
is connected to the RS485 bus.
- The relay output is N/O when places are available.
- The relay output is N/C when the parking is full. Places become available when the occupancy is equal
to the threshold.
Counting Zone entry.
The access is granted at the Entry card reader only if the user have an access rights on the reader
and that the option « Set as counter » is enabled.
NOTE: In user properties if the icon «P» is enabled (green) then the user doesn't belong to any zone
and then the counter will not be increased or decreased while getting access entry or exit at the doors.
Counting Zone exit.
The access is granted at the Exit card reader only if the user have an access rights on the reader
and that the option « Set as counter » is enabled.
NOTE: In user properties if the icon «P» is enabled (green) then the user doesn't belong to any zone and
then the counter will not be increased or decreased while getting access entry or exit at the doors.
a loop can be used to enable/disable the reader at a parking entry or exit.
the loop is connected the iNtBuSW to terminal "L" and "M":
- "L" and "M" contact open: card reader enabled,
- "L" and "M" contact closed: card reader disabled.

ANTI-PASSBACK*

Site configuration.
- In the "Site" menu select the "Modify" submenu
- Click on the icon "Counting Zone"
- Enter the number of zones you wish to add.
(Maximum from 1 to 8 zones).
cdvi.com
26
cdvigroup.com
Configuration of the counting zone in uSerS
- Click on the "user" menu and select the « Modify
» submenu
- Select a user
- Select the zones to enable for all the badges of
the users
-all the zones in Green will be enabled.
P= Permanent
Click on P (Green square) if you wish to grant ac-
cess to a user without being counted in the zone.
- Click on «SAVE»
- Click on «EXIT »
* The anti Passback function forbids the user from using his card a second time right after
swiping it once on the same card reader.
EN