Ten Haaft SamySolar Manuel D'utilisation page 75

The confi guration is now complete. You may now exit the settings menu.
Next, one of the programmed satellites must be searched with the automatic
search. When the satellite has been found, the system must readjust the antenna
to a different satellite if a channel transmitted by this other satellite is selected at
E
the receiver. In case of an automatic search, this may take several seconds. If the
antenna has already been aimed at a satellite, no automatic search has been started
in the mean time and the vehicle has not moved since, the aiming process will be
much quicker.
Please note that the DiseqC signals can only be processed when your SamYSo-
Sat mode
lar+® is in satellite mode. This is indicated by the message
in the display. If any other menu option is selected at the control panel display,
all DiseqC signals are ignored!
75