COMMANDE DE REFROIDISSEUR À VIN
1.
Power Button. Toggles the unit on/off.
2.
Interior Light Toggle Button. To manually
illuminate / extinguish the interior lights
while door remains closed.
3.
Temperature Display. Display screen shows
the temperateure setting (see setting the
temperature below).
o
Setting the temperature
When you plug in your unit for the first time, the temperature will
automatically be set to 10 degree C and the temperature display window shows
the cavity temperature at the moment.
The shown temperature reading will change as the cavity temperature
continuous to change until the pre-set termperature is achieved. The lead-time
to achieve to the pre-set temperature depends on the nature and quantity of
the object placed inside the cavity.
The temperature range can be set as low as 4 degree C or as high as 22 degree
C to suit your specific storage requirements. Each depression of the UP or
DOWN button will allow you to adjust the temperature in 1 degree C
increments within the aforementioned range.
The final cavity temperature may not reach the pre-set temperature as it
depends on the ambient temperature. For this unit (6 bottles version), the max.
temperature difference is 18 degree C below the ambient temperature.
In the event of power failure or interruption, all modiefied settings are lost and
the default settings are used once power resumes.
This unit does not have the WARM function. When the ambient temperature is
below the pre-set temperature, the unit sill stop and the unit will re-activate
after the ambient temperature is higher than the pre-set temperature.
INSTALLING THE VENTILATION SPACER
o
Important: to ensure good ventilation, please fit the spacer (provided) onto the
proper location (as shown below).
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
4.
Temperature "UP" Button. Used to raise
(warmer) the termperature.
5.
Temperatue "DOWN" Button. Used to
decrease (cooler) the temperature.
Photo shown may vary from product.