DYNAMIC
EN
Assembly
Recommendations
• Before starting assembly, please read instructions and
follow them during installation process.
• Use the adequate tools for each operation.
Electricity
• Disconnect ignition key.
• Disconnect battery before starting assembly.
• Make sure electric components are securely connected,
checking their correct fitting.
! Warning
If, during assembly, the unit becomes slanted or the
cabin drops with the unit mounted, wait for at least
60 minutes from the moment the unit is horizontal
before starting up.
Symbology
Fragile
Beware of cuts!
Electrical hazard
Indications concerning position are:
RIGHT: Passenger side
LEFT: Driver side
Driving torques (N.m)
Steel Quality
Fillet
8.8
M6/100
10
Hoses assembly
Driving torques (N.m)
Hose size
1/4"
3/8"
Wrench
opening
10.9
13
10
Fitting
Driving
Tool
Torque
13-15
Wrench 14mm.
15-17
Wrench 19mm.
Ratchet wrench of 10
Cruciform screwdriver TOP 10
Wrench of 10, 11, 14, 17, 19
Allen key of 6
Socket wrench of Ø10
Broach Ø 4
Drill
Broach Ø 6
Circular saw Ø 19, 22, 48
Scissors
Riveter M6
Related documentation
Mounting instructions
User's guide
Troubleshooting
Parts list
Documentation included
Quick guide
Warranty
!
The installing personnel must have a sufficient training
in vehicles air conditioning.
!
dirna Bergstrom, s.l. shall not be responsible for
breakdowns or damages coming from an inadequate
handling or installation of the equipment or from
modifications and substitutions carried out without our
express and written authorisation.
!
Amount of refrigerant gas load R-134a to be
introduced in the circuit: 300 g.
!
Please see product warranty procedure included in
Troubleshooting.
!
Please see equipment User's Guide for its correct
functioning of the remote control and control panel.
!
Once installation is finished, the following documents
must be handed over to the user: User's Guide,
Warranty and Troubleshooting.
18
Tools
1001861324
220AA64002
220AA64003
1001861326
1000972524
220AA10010
! Warnings
®