Safety Notes; Product Description And Specifications; Intended Use; Product Features - Bosch D-tect 150 Professional Notice Originale

OBJ_DOKU-51842-001.fm Page 14 Friday, March 4, 2016 1:31 PM
14 | English
Nur für EU-Länder:
Gemäß der europäischen Richtlinie
2012/19/EU müssen nicht mehr ge-
brauchsfähige Messwerkzeuge und gemäß
der europäischen Richtlinie 2006/66/EG
müssen defekte oder verbrauchte Ak-
kus/Batterien getrennt gesammelt und ei-
ner umweltgerechten Wiederverwendung
zugeführt werden.
Nicht mehr gebrauchsfähige Akkus/Batterien können direkt
abgegeben werden bei:
Deutschland
Recyclingzentrum Elektrowerkzeuge
Osteroder Landstraße 3
37589 Kalefeld
Schweiz
Batrec AG
3752 Wimmis BE
Änderungen vorbehalten.
English

Safety Notes

Read and observe all instructions. The inte-
grated protections in the measuring tool may
be compromised if the measuring tool is not
used in accordance with the instructions pro-
vided. SAVE THESE INSTRUCTIONS FOR FU-
TURE REFERENCE.
 Have the measuring tool repaired only through quali-
fied specialists using original spare parts. This ensures
that the safety of the measuring tool is maintained.
 Do not operate the measuring tool in explosive environ-
ments, such as in the presence of flammable liquids,
gases or dusts. Sparks can be created in the measuring
tool which may ignite the dust or fumes.
 For technological reasons, the measuring tool cannot
ensure 100 % certainty. To rule out hazards, safeguard
yourself each time before drilling, sawing or routing in
walls, ceilings or floors by means of other information
sources, such as building plans, pictures from the con-
struction phase, etc. Environmental influences, such as
humidity or closeness to electrical devices, can influence
the accuracy of the measuring tool. Surface quality and
condition of the walls (e.g., moisture, metallic building ma-
terials, conductive wallpaper, insulation materials, tiles)
as well as the amount, type, size and position of the objects
can lead to faulty measuring results.
1 609 92A 26X | (4.3.16)
Product Description and Specifica-
tions
Please unfold the fold-out page with the representation of the
measuring tool and leave it unfolded while reading the operat-
ing instructions.

Intended Use

The measuring tool is intended for detecting objects in walls,
ceilings and floors. Depending on material and condition of
the structural surface, metal objects, wooden beams, plastic
pipes, wiring and cables can be detected. For objects detect-
ed, the allowable drilling depth to the surface of the object is
determined.
The measuring tool complies with the limit values according
to EN 302435. Based on this, it must be clarified whether the
measuring tool may be used in, e.g., hospitals, nuclear power
plants and in close vicinity to airports, or mobile phone sta-
tions.

Product Features

The numbering of the product features shown refers to the il-
lustration of the measuring tool on the graphic page.
1 Marking aid, top
2 Wheel
3 Marking aid, left and right
4 Battery lid
5 Latch of battery lid
6 Handle
7 Maintenance flap
8 Serial number
9 Sensor area
10 Selection button, right
11 Start button
Start
12 Selection button, left
13 Audio signal button
14 Setup button Setup
15 On/Off button
16 Display
17 LED
18 Protective pouch
The accessories illustrated or described are not included as stand-
ard delivery.
Display Elements
a Audio signal indicator
b Battery indicator
c Sensor-range indicator
d Area already detected
e Measuring scale for allowable drilling depth
f Area not yet detected
Bosch Power Tools