Using The Device - InnoCigs VAPANION BOX MOD KIT SWITCHER Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

VAPANION
SWITCHER
Notes for Commissioning
Fully charge the required replaceable 18650 batteries before first use. We recommend using high-drain cells with
a discharge current of ≥ 25A. Please note the positive and negative poles in the battery compartment. Ensure
that there is no visible damage to the surface of the battery cells.
The device has a 510-pin connection, making it suitable for a variety of sub-ohm-capable clearomizers.
Note for Cleaning
Use a dry cloth or cotton swab to clean the device.
Power On/Off
Press the Fire button rapidly five times within two seconds to switch on the device. Turn the device off in the
same fashion, by pressing the Fire button quickly five times. We recommend that you turn the device off during
transport and when the device will not be used for long periods of time.
Vaping
While holding the fire button of your e-cigarette, inhale the vapor slowly and continuously through the
mouthpiece of your clearomizer. Release the fire button while exhaling the vapor.
68

USING THE DEVICE

Publicité

Table des Matières
loading

Table des Matières