Technical Specifications - afx light DC-54DMX Manuel D'utilisation

To stop a running program, press the "A" button again.
If you use the sliders 'cross' and 'stand', you can adjust the internal synchronization between the projectors and adjust the
brake time between scenes. During the execution of the program, you can still manually control the projectors, even if these
projectors are controlled in the program. When the program is activated, press the "B" and select the projector with buttons
"UP" or "DOWN". As to altering the value of a slider, take control of the projector that will no longer be dependent on the
program. If you use the buttons "UP" or "DOWN", you can control multiple projectors.
Press the "B" button to select another program.
To deactivate the manual control of the projectors, press the "B" button twice. When display a "-" in the display of "PROJ.".
Press the "UP" or "DOWN" to see if more projectors are still in manual control.
The following points have to be considered during the inspection:
All screws for installing the devices or parts of the device have to be tightly connected and must not be corroded.
There must not be any deformations on the housing. The electric power supply cables must not show any damage, material
fatigue or sediments. Further instructions depending on the installation spot and usage have to be adhered to by a skilled
installer and any safety problems have to be removed.
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or solvents.
Please make sure that the power is off before dismantling or maintaining. It's not allowed to use alcohol or chemical solvent.
When the device doesn't work, please check if the fuse is burnt out or not. If it is, the same fuse should be replaced.
But please note the repair must be handled by professional.

TECHNICAL SPECIFICATIONS

Number of channels: ........................................................................................................ 54 channels
Number channels per page: ............................................................................................... 6 channels
Standard control: ................................................................................................................... DMX512
Operating temperature: ............................................................................................... -10°C to +50°C
Consumption: ............................................................................................................... 0.7W/ 59mA
Power supply: ..................................................... 9VBattery or ADAPT-DC9V/AC 110-240V / 50-60Hz
Dimensions: ......................................................................................................................200x125x45mm
Weight: ..................................................................................................................................................0.5Kg
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your dealer about
the way to proceed.
© Copyright LOTRONIC 2016 DC54DMX Page 7