afx light DC-54DMX Manuel D'utilisation page 5

Press the "SELECT" to exit the internal synchronization.
2 - Manual operation
You can use DMX controller to control the projectors manually (using sliders). This allows complete freedom of movement
and function and adapts best to specific use.
To select the manual mode, press the "B". The DMX controller will then display the number of page on which he is located
(between 1 and 9, each page having six channels, which makes a total of 54 controllable channels).
You can then use the sliders to control the DMX512 line that was connected to the device. Here is the table showing the
Number of channels according to the page:
3 - Setting a scene
To enter the programming mode, press "A" button for 3 seconds. The display of "PROG." indicates a number and blinks
rapidly.
You can select the program number you want to edit by pressing the 'UP' or 'DOWN'. The device records up 9 programs (1-9),
each containing 50 scenes (1 to 50).
The display of "SCENES" indicates the last scene ("00" means that no scene has been recorded for this program.)
© Copyright LOTRONIC 2016
1 1 a
2 7 a 12
3 13 a 18
4 19 a 24
5 25 a 30
6 31 a 36
7 37 a 42
8 43 a 48
9 49 a 54
DC54DMX Page 5