afx light DC-54DMX Manuel D'utilisation page 4

CONNECTION
1- In the case of use on mains:
Connect the power supply sector, connect the power supply to the unit by the 9V DC input.
Place the power button on the position "EXTERNAL"
2- In the case of use on battery:
Insert a 9V battery (6LR61) in the space provided for this purpose
Place the power button on the heading "BATTERY"
3- The device will then be connected to a line containing the DMX512 compatible projectors.
OPERATION
1 - Setting up and configuration
Once the controller turned on, a self-test will be conducted, which will enable it to deliver all functions to zero.
When self-test is complete, you will get the following screen:
According to the type of effect of light connected to the DMX controller, you can synchronize a projector to another. For
example, you have multiple scenes came from same type of projectors which connected in cascade and want a sweeping
effect chain, a time of transition "CROSS" is active (Slider No. 2).
To activate the internal synchronization of the projectors, press and hold the "SELECT" button 2 seconds. The display of
"PROJ." indicates a number of the page which is flashing. The display will indicate whether the internal synchronization is
active ("ON") or inactive ("OFF"). To set the value of "ON" or "OFF", press the button "B".
You can change the number of active projector 1 to 9 (each projector occupies 6 channels at once) using the buttons "UP"
and "DOWN".
© Copyright LOTRONIC 2016 DC54DMX Page 4