Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Product performance
SWITCHING ON AND OPERATING THE PURE AIRBOX HOME "S"
The equipment you have purchased is plug & play, which means it does not need any
prior configuration.
1.
Before switching it on, check that you have all the relevant components: cord
and Pure Airbox Home "S" purifier.
2.
Locate a power socket to connect the Pure Airbox Home "S" and plug the unit
into the socket using the power cord.
3.
To switch the equipment on, double click on the power button (ON / OFF) and
the screen and its perimeter light will illuminate.
3.
Select speed mode and increase speed to maximum (10). (See point 1, page 21).
4.
After having checked its proper operation, it is recommended to set the purifier
at its maximum speed during the first 10 minutes to execute a deep cleaning of
the room.
5.
Then, it is recommended to leave it at medium speed, below 5, to maintain
optimal recirculation and comfort speed.
6.
To set automatic unit shutdown, use the timer button (see point 2, page 21) and
select the required operating time, selecting the desired operating time.
The screen switches off automatically after 1 minute of inactivity.
But, if you want to turn off the lights on the screen in that very moment, click
once on the ON / OFF button.
The proximity sensor detects the movement of your hand as it passes over and
turns the screen back on.
SWITCHING OFF AND DISCONNECTION OF THE PURE AIRBOX HOME "S"
To switch off the unit, press and hold on the ON / OFF button for 3 seconds.
If the purifier is not to be used for long periods, disconnect the power cord.
22
Pure Airbox Home "S"
Publicité
Table des Matières
