Important - Zonair3D DAITSU PURE AIRBOX HOME S Manuel De L'utilisateur

OPENING INSTRUCTIONS AND FILTER REMOVAL

IMPORTANT:

·
It is recommended to use gloves when replacing the filters to avoid any
contact with adsorbed substances.
·
Always take the filters by the frame. Never touch the filter surface
so as not to damage it.
1- Slide the rear exterior panel of the unit
along its track, about 5 cm vertically, and
then outwards
ABSOLUTE FILTER
Fan
GRSYSTEM
PRE-FILTER
3 - Identify filters
handle
flap
5 - Remove the GRSystem filter by the
handle, lifting it about 2cm and pulling it
outwards (always sliding the bottom flap
of the filter under the lateral guides)
24 Pure Airbox Home "S"
2- To access inside, unscrew the 6 screws
on the interior metal panel with a Phillips
screwdriver
4 - Remove the pre-filter by sliding it along the
guides
6 - Loosen the 4 setscrews holding the
absolute filter in each corner so that it can be
fully removed along the guides