BST MEETY Mode D'emploi page 9

Tape player / recorder :
1. TAPE DECK
Insert the tape in this part and push the deck to put the tape in stop postition.
2. REC BUTTON
Press this button to start the record of the tape.
3. PLAY BUTTON
Push this button to start the playback.
4. REW BUTTON
Use this button to rewind the tape.
5. FF.WD BUTTON
Use this button to go forward in the tape.
6. STOP / EJECT BUTTON
In play mode, one press on this button stops the playback ( the player enters in the stop mode ). A second press ejects the tape.
7. PAUSE BUTTON
If you want to stop the playback ( or the record ) for a few moment, press this button to stop and one more time to restart the playback ( or the
record ).
Trolley use :
To use the trolley, pull the handle until you reach the height you want. To arrange the trolley, push on the two silver balls inside the trolley.
SAFETY INSTRUCTIONS:
Read all safety instructions before operating meaty
Install equipment as follow condition.
- Install in a flat place, not bending or curved.
- Do not install near water and moisture.
- Place power amplifier away from heat source, such as radiators or other heat source.
Keep in mind the following when connecting amplifiers
- Read the owner manual before connecting the amplifier
- Connect each connection of the amplifier perfectly. If not, it maybe cause hum, damage, electric shock in case of misconnection.
- To prevent electric shocks, do not open top cover.
Connect the power cord with safety after check of AC power.
9