Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
CD module :
1. DISPLAY
This display shows : Track number, the elapsed time and the track list.
2. CD INPUT
Insert your CD in this part.
3. PROG BUTTON
This switch is used to program a reading list (see description later)
4. SHUFFLE BUTTON
This button allows cd player to read the disc in an random way.
5. STOP BUTTON
Used to stop the reading
6. PLAY / PAUSE BUTTON
Press to start, again to pause and then again to continue playing.
7. SKIP >>I BUTTON
Used to select the next track. If you push the switch more than one second, you switch to search mode.
8. SKIP I<< BUTTON
Used to select the next track. If you push the switch more than one second, you switch to search mode.
9. REPEAT / ENTER BUTTON
This button is used to repeat one track ( one pressure ) or all the disc ( two pressure ). The third pressure is the normal mode.
10. EJECT BUTTON
Used to eject the CD
Function Prog. :
To program a list of reading, you must use the Prog function. of the CD player. Use the following procedure :
Push once on the Prog key. (" P01: " is displayed on the LCD)
-
Select the wanted track using the keys SKIP REWS (8) and SKIP FF (7)
-
-
Push on the Repeat key (9) to validate your choice.
Repeat the operation for all tracks you want to program
-
Push on the Play/Pause key to launch reading
Handheld microphone :
1. MESH
2. POWER LED INDICATOR
When you switch your microphone on, the LED will light.
3. LOW BATTERY LED INDICATOR
This LED shows you the operating level of the battery. When you
switch your microphone on, the LED lights on for a fast moment then
lights off. If the LED stay lights on, please change the battery because
it 's out of order.
4. POWER SWITCH
This switch have two positions :
-
Position off : To switch your handheld microphone off.
-
Position On : In this position, the microphone is on & the
transmitting is available.
5. BATTERY COVER
Publicité
Table des Matières
