Quick Start; Important - shark V2950 Manuel Du Propriétaire

QUICK START

Fig. 1
ASSEMBLE
1 Assemble the upper and lower
handle into the elbow joint to
form the Shark Backsaver
®
folding handle. Then insert it
into the base of your cordless
floor and carpet sweeper.
(fig. 1)
8 1.800.798.7398
IMPORTANT: Before you can start using your new
cordless floor and carpet sweeper, you'll need to
charge it for 7 hours.
Fig. 2
CLEAN
2 Pull back on the handle and
press lightly on the body of the
unit with your foot to engage the
™
steering. (fig. 2)
3 Using your foot, press the
On/Off button and push your
cordless floor and carpet
sweeper forward over the
surface you wish to clean.
(fig. 3)
Fig. 3
4 Press the speed button on the
right with your foot to change
the speeds. One light indicates
the speed optimized to clean
bare floors and two lights
indicate the speed optimized to
clean carpets and larger debris
on bare floors.