JVC KD-LX50 Manuel D'instructions page 28

STOP
PLAY
6
7
8
Speak the word(s) you want to record while "SPEAK" is flashing
on the display. (In this example, speak "Turn off.")
• If the System recognizes your word(s), "REPEAT" starts flashing on the display after
the voice navigation "Please repeat."
• If the System does not recognize your word(s), it will ask you to speak again. In this
case, speak the word(s) again.
28
Select the preset voice command number (VOICE 01).
Press STR (ATT) to make the System ready to record
your voice.
"SPEAK" starts flashing on the display after the voice navigation "Please
speak now."