Triton AJA 300 Instructions D'utilisation Et Consignes De Sécurité page 7

• The On/Off power button on the router table has been
designed to allow the operator to nudge the button
while keeping both hands on the workpiece. This is
useful when it is necessary to stop part-way through
a cut.
• Do not try to cut too tight a radius in thick material. If
necessary, gradually work up to the line in a series of
shallow cuts, whittling away the waste.
WARRANTY
To register your guarantee visit our web site at
www.tritontools.com* and enter your details.
Your details will be included on our mailing list
(unless indicated otherwise) for information on future
releases. Details provided will not
be made available to any third party.
PURCHASE RECORD
Date of Purchase:
Model: AJA300
Retain your receipt as proof of purchase
___ / ___ / ____
• A wide selection of jigsaw blades are available. Select
the correct blade for the task. Narrow blades are more
suitable for cutting small circles and sharp curves.
• Check blades regularly as vibration during use can
cause them to loosen.
• Always disconnect the power when leaving the unit
unattended, or when the task is complete.
Triton Precision Power Tools guarantees to
the purchaser of this product that if any part
proves to be defective due to faulty materials
or workmanship within 12 MONTHS from the
date of original purchase, Triton will repair, or
at its discretion replace, the faulty part free of
charge.
This guarantee does not apply to commercial
use nor does it extend to normal wear and
tear or damage as a result of accident, abuse
or misuse.
* Register online within 30 days.
Terms & conditions apply.
Operation / Warranty
GB
7