D-Link NetDefend DFL-260E Guide D'installation page 5

Using the WebUI
To use the WebUI, the workstation from which
you are managing the device must initially be on
the same subnetwork as the device.
Browser
Microsoft Internet
Explorer
Mozilla Firefox
Netscape Navigator 8.0 or higher
Table 4. Browser Compatibility
To access the device with the WebUI:
Step 1
Connect your workstation on the LAN1.
Step 2
Ensure your workstation is configured with a
static IP address in the 192.168.10.0/24 subnet.
Note:
Disable pop-up blocking software or add the
management IP address https://192.168.10.1 to
your pop-up blocker's allow list.
Step 3
Launch your browser; enter the IP address
for the LAN1 interface. (The factory default IP
address is https://192.168.10.1), then press
Enter.
Figure 6. Browser Address
Note: DFL-260E/860E allows either HTTP
or a secure HTTPS connections from any
management host. However, for security
reasons, only a secure HTTPS connection is
allowed by default. For more information about
configuring connections settings, please refer to
the Firewall User Manual.
Step 4
Log into the NetDefend Firewall web interface.
The default login information is:
Version
6.0 or higher
1.0 or higher
Note: The Language drop-down menu allows
you to select a language for the WebUI. By
factory default, NetDefend Firewall only includes
English. You may upload specific language files
from within the WebUI for additional language
support. Currently, Japanese, Russian,
Simplified Chinese, and Traditional Chinese
language files are available.
Using a Console Connection (RJ-45)
The NetDefend Firewall provides an RJ-45
console port that supports a connection to a
computer or console terminal for monitoring and
configuring the device. This port uses a female
DB-9 connector, implemented as a data commu-
nication terminal equipment (DCE) connection.
To use the console port connection, you need
the following equipment:
1. A terminal or a computer with both a serial
port and the ability to emulate a terminal.
2. A RJ-45-to-DB9 RS-232 cable with female
connector. (included in the package)
3. If your Laptop or PC does not have a RS-232
connector, an converter is required.
Note: DFL-260E/860E does not come with an
RS-232 converter.
5
Username: admin
Password: admin
Figure 7. Authentication Message