ATIM ARM-SE Guide D'utilisation page 9

Power/Magnetic
Frequency Band
Field
25 mW e.r.p.
25 mW e.r.p. Power
density:
-4.5
863-870
(note 7)
g1 MHz (notes
3 and 4)
25 mW e.r.p.
868-868.6
g1.1 MHz 25 mW e.r.p.
(note 4)
868.7-869.2
g1.2 MHz 25 mW e.r.p.
(note 4)
869.4-
g1.3 500 mW e.r.p.
869.65 MHz
869.7-870
5 mW e.r.p.
g1.4 MHz
25 mW e.r.p.
(note 11)
Bandes de fréquences applicables dans la bande 868 MHz pour "Dispositifs non spécifiques à courte portée" spécifiées dans
la Recommandation ERC 70-03, [2].
Spectrum access and
mitigation
requirements
≤ 0.1% duty cycle or
LBT (notes 1 and 5)
≤ 0.1% duty cycle or
LBT+AFA
dBm/100kHz
(notes 1, 5 and 6)
≤ 0.1% duty cycle or
LBT+AFA
(notes 1 and 5)
≤ 1% duty cycle or
LBT+AFA (note 1)
≤ 0.1% duty cycle or
LBT+AFA
(note 1)
≤ 10% duty cycle or
LBT+AFA
(note 1)
No requirement
≤1% duty cycle or
LBT+AFA
(note 1)
ATIM_ARM-SE_UG_FR_V2.3
Modulation/
ECC/ERC
maximum occupied
Décision
bandwidth
≤ 100 kHz for 47 or
more channels (note
2)
No spacing
≤ 100 kHz,
for 1 or more
channels
modulation
bandwidth
≤ 300 kHz
(note 2)
No spacing,
for 1 or more
channels
(note 2)
No spacing,
for 1 or more
channels
(note 2)
No spacing,
for 1 or more
channels
No spacing
for 1 or more
channels
Notes
FHSS
DSSS and other
wideband techniques
other than FHSS
Narrow /wide-band
modulation
Narrow / wide band
modulation.
No channel spacing,
however, the whole
stated frequency band
may be used
Narrow / wide band
modulation.
No channel spacing,
however, the whole
stated frequency band
may be used
Narrow / wide band
modulation
The whole stated
frequency band may be
used as 1 channel for
high speed data
transmission
Narrow / wide band
modulation.
No channel spacing,
however, the whole
stated frequency band
may be used
8