Micromaxx MD 15486 Mode D'emploi page 28

7.2.1. Brewing process using coffee beans
 Ensure that the grinder is switched on (Grinder LED is not lit). If necessary, press
the GRINDER button so that the GRINDER LED goes out.
 Open the lid of the coffee bean container.
 Add coffee beans (max. 200g) to the container and then replace the lid.
NOTE
To stop the beans from becoming damp, do not add too many cof-
fee beans to the coffee bean container. In other words, do not push the
beans down into the container.
 Set the fineness setting with the grinder setting function:
Coarser setting
 Set the desired number of cups (2, 4, 6, 8, 10 or 12 cups) by repeatedly pressing
the CUPS button. If you do not set the number of cups, the largest number of
cups (12 cups) will be used for the brewing process.
 Press the STRENGTH button repeatedly to adjust the strength of the coffee
based on the amount of water used:
Stronger coffee (less water)
Medium strength coffee (normal amount of water)
Weaker coffee (more water)
 Press the PAUSE/START button to start the brewing process. BREW appears
on the display.
• The grinder will start operating after around 3 seconds and fills the coffee filter
with ground coffee.
• The brewing process will then start.
Once the brewing process has ended, BREW will disappear from the display
•
and a signal tone will sound.
Finer setting
DE
EN
FR
NL
DK
29 of 118