Power Indicator; Input Sensitivity Control - Kenwood KAC-6104D Mode D'emploi

Controls

1 Power indicator

When the power is turned on, the Power indicator lights.
If the Power indicator does not light when the power is turned on, the protection function may be activated.
Check whether there is any indication of trouble. Refer to <Protection function> (page 5).
2 LPF(Low-Pass Filter) FREQUENCY control
This control adjusts the frequency band output from this unit.
3 BASS EXPANDER switch
Setting this switch to "ON", when a certain volume is exceeded, a dynamic bass sound is output.

4 INPUT SENSITIVITY control

Set this control according to the pre-output level of the center unit connected with this unit, or to the
maximum power output of the genuine-accessory car stereo.
Use the diagram on the right as a guide.
8
English
LPF INPUT
FREQUENCY[Hz] SENSITIVITY[V]
1
150 2 LINE IN
SPEAKER
0.5
100
LEVEL INPUT
L R
3
0.3
70
4
5 0.2 [MAX]
50 200 [MIN]
OFF ON
BASS EXPANDER
40W–15W
1
2
0.5
3
0.3
4
5 0.2 [ MAX ]
[ MIN ]