Noise/Vibration Information; Mounting And Operation; Working Advice - Bosch AFS 23-37 Notice Originale

Noise/Vibration Information

Noise emission values determined according to EN 50636-2-91.
Typically the A-weighted noise levels of the product are:
– Sound pressure level
– Uncertainty K
– Sound power level
– Uncertainty K
Vibration total values ah (triax vector sum) and uncertainty K determined according to EN 50636-2-91
– Vibration emission value a
h
– Uncertainty K

Mounting and Operation

Do not connect the product to the mains socket before
u
it is completely assembled.
The cutting head continues to rotate for a few seconds
u
after the product is switched off. Wait until the cut-
ting head comes to a stop before switching the
product on again.
Do not rapidly switch off and on again.
u
Remove grass build-up from the cutting head when re-
u
placing the cutting head.
Only use Bosch approved cutting elements. Cutting
u
performance will vary with different cutting elements.
When using the cutting blade always ensure that the
u
blade is securely fastened using the locking nut.
In case of prolonged use, we recommend to take ap-
u
propriate breaks.
The numbering of the figures refer to the illustrations on the
graphics pages.
Action
Delivery scope
Mounting the protection guard
Connecting the shaft
Mounting the line spool and the
cutting line
Mounting the blade
Troubleshooting
Problem Possible Cause
Product does not run Power turned off
Mains socket faulty
Bosch Power Tools
dB(A)
dB
dB(A)
dB
2
m/s
2
m/s
Action
Mounting the kickback protection/
operating advice for right-handers
Mounting the kickback protection/
operating advice for left-handers
Mounting the shoulder strap
Adjusting the handle length
Connecting the extension cable
Switching On and Off

Working advice

Cleaning
Cutting line storage
Selecting accessories
Working Advice
Application area
Figure Page
Clearing shrubs/brushes
A 269
Cutting saplings
B 270
Trimming/thinning
C 270
Clearing weeds
D 271
Cutting long grass
Clearing nettles
E 272 - 273
Line
83
= 2.5
95
= 1
4
1.5
Figure
Cutting tool
Blade
Blade
Line
Line/blade
Line
Line/blade
Corrective Action
Turn power on.
Use another socket.
F 016 L81 886 | (19.02.2019)
English | 17
Blade
85.5
= 2.5
97
= 1
5
1.5
Page
F 274
G 274
H 275
I 275
J 276
K 276
L 277
M 278
N 278