Noise/Vibration Information; Charging Procedure - Bosch AdvancedHedgeCut 36 Notice Originale

16 | English
Charger
Charging current
Charging period (battery discharged)
– Battery with 2.0 Ah
Weight according to EPTA‑Procedure 01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.

Noise/Vibration Information

Noise emission values determined according to
EN 60745-2-15.
Typically the A-weighted noise levels of the product are:
Sound pressure level 67 dB(A); sound power level
87 dB(A). Uncertainty K = 3.0 dB.
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745-2-15:
2 2
a = 2.5 m/s , K = 1.5 m/s .
h
The vibration level given in these instructions has been
measured in accordance with a standardised measuring pro-
cedure and may be used to compare power tools. It can also
be used for a preliminary estimation of exposure to vibra-
tion.
The stated vibration level applies to the main applications of
the power tool. However, if the power tool is used for differ-
ent applications, with different application tools or poorly
maintained, the vibration level may differ. This can signific-
antly increase the exposure to vibration over the total work-
ing period.
To estimate the exposure to vibration accurately, the times
when the tool is switched off or when it is running but not ac-
tually being used should also be taken into account. This can
significantly reduce the exposure to vibration over the total
working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping the hands warm,
and organising workflows correctly.
Switching on
For Your Safety
Caution: Switch garden tool off and remove battery
u
from machine before adjusting or cleaning.
The blades continue to move for a fraction of a second
u
after the hedgecutter is switched off.
Do not touch the moving blades.
u
Charging the Battery
Pay attention to the mains voltage. The voltage of the
u
power source must match the voltage specified on the
rating plate of the charger.
F 016 L94 044 | (17.12.2019)
AL 3640 CV
KO 2 607 225 103
A 4.0
min 45
kg 0.55
/ II
The battery is equipped with temperature monitoring that al-
lows charging only in the temperature range between 0 °C
and 35 °C. In this manner, a high battery service life is
achieved.
Note: The battery is supplied partially charged. To ensure
full battery capacity, completely charge the battery in the
battery charger before using for the first time.
The lithium-ion battery can be charged at any time without
reducing its service life. Interrupting the charging procedure
does not damage the battery.
The "Electronic Cell Protection (ECP)" protects the lithium-
ion battery against deep discharging. When the battery is
discharged, the machine is switched off by means of a pro-
tective circuit: The garden product no longer operates.
Do not continue to press the On/Off switch after an auto-
matic shut-off of the machine. The battery can be dam-
aged.
Observe the notes for disposal of the battery.
Inserting/Removing the Battery (see figure B)
Note: Using unsuitable batteries can lead to malfunctions or
damage the machine.
Insert the charged battery (9). Ensure the battery is inserted
correctly.
To remove the battery (9) from the machine, press the bat-
tery unlocking button (7) and pull the battery out.

Charging Procedure

The charging procedure starts as soon as the mains plug of
the charger is plugged into a socket outlet and the battery
(9) is inserted onto the charger (8).
Due to the intelligent charging method, the charging condi-
tion of the battery is automatically detected and the battery
is charged with the optimum charging current, depending on
battery temperature and voltage.
This gives longer life to the battery and always leaves it fully
charged when kept in the charger for storage.
Battery charge-control indicator
The battery is equipped with a charge-control indicator,
which indicates its charge condition. The charge-control in-
dicator consists of 3 green LEDs.
Press the charge-control indicator button to actuate the
charge-control indicator. After approx. 5 seconds, the
charge-control indicator goes out automatically.
AL 36V-20
2 607 226 279
2.0
65
0.55
/ II
Bosch Power Tools