•
The pot is empty and overheated.
•
Due to overheating, the electronics have automatically reduced or automatically switched
off the power.
The cooling fan keeps running after it has been switched off:
•
This is not a fault; the fan continues to run until the appliance has cooled down.
•
The fan switches off automatically.
The automatic preheating function does not switch on:
•
The cooking zone is still hot [ H ]
•
The maximum power level is switched on [ 9 ].
Display [ U ]:
•
Refer to the chapter on the keep warm level.
Display [ II ]:
•
Refer to the chapter on the Stop&Go function.
The display shows [
•
An object or a liquid is covering the buttons. The display will disappear as soon as the
buttons are released or cleaned.
The display shows [ E2 ]:
•
The hob has overheated; let it cool down first and then turn it on again.
The display shows [ E8 ]:
•
The air intake of the fan is clogged; please remove the things that are causing the
interference.
The display shows [ U400 ]:
•
The hob is not connected to the mains. Check the connection and turn on the hob.
The display shows [ Er47 ]:
•
The hob is not connected to the mains. Check the connection and turn on the hob.
If any of the above signs persist, please contact customer service.
] or [ Er03 ]:
26