Yamaha TSX-B72 Mode D'emploi page 16

LISTENING TO MUSIC FROM YOUR Bluetooth COMPONENT
Listening to a Bluetooth component
Connecting an already-paired component via Bluetooth
Once pairing with a component has been completed, connecting with that component via Bluetooth will be
easy next time.
■ Connecting from this unit
Set SOURCE to
The Bluetooth indicator will blink on the front panel display; this unit will search for the other component
that was most recently connected via Bluetooth, and will then establish a connection (You must first turn on
the Bluetooth setting of the other component).
When the Bluetooth connection has been established, the Bluetooth indicator will light.
Note
Yamaha does not guarantee all connections between this unit and Bluetooth component.
y
Pressing (Bluetooth) on the top panel of this unit also establishes connection with the component that was most recently
connected via Bluetooth; however, SOURCE is not automatically set to
■ Connecting from the other component
A In the Bluetooth settings of the other component, turn Bluetooth on.
B From the Bluetooth connection list of the other component, choose this unit (TSX-B72
Yamaha).
The Bluetooth connection will be established, and the Bluetooth indicator on the front panel display of this
unit will light.
Note
Bluetooth connections cannot be established from the other component when this unit is in standby mode. Turn the system on.
Disconnecting a Bluetooth connection
If any of the following operations are performed while a Bluetooth connection is being used, the Bluetooth
connection will be disconnected.
• Press (Bluetooth) on the top panel of this unit.
• Turn the system off.
• Turn off the Bluetooth setting of the other component.
12
En
Bluetooth
indicator
(Bluetooth).
A Set SOURCE to
B Connect this unit and your other
component via Bluetooth.
C Play back music from your Bluetooth
component.
Note
Take care that the volume setting of this unit is not too high. We
recommend that you adjust the volume on the other component.
y
• While the system is turned off, if you connect a Bluetooth
component to the unit and play back music, the system will
automatically turn on.
• If you disconnect the Bluetooth connection from your other
component while the playback source is set to Bluetooth, this
unit will automatically turn off the system.
• If Bluetooth is selected as the playback source, this unit will
automatically turn off the system when 60 minutes have
elapsed without any Bluetooth connection nor any operation
performed.
(Bluetooth).
(Bluetooth).