Replacement Parts; Free Warning Label Replacement; Service And Repairs - Delta 50-875 Manuel D'utilisation

Type ii
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

REPLACEMENT PARTS

Use only identical replacement parts. For a parts list or to order parts, visit our website at www.DeltaMachinery.com/service. You
can also order parts from your nearest factory-owned branch, Authorized Warranty Service Center or by calling Technical
Service Manager at 1-800-223-7278 to receive personalized support from one of our highly-trained representatives.

FREE WARNINg LABEL REPLACEMENT

If your warning labels become illegible or are missing, call 1-800-223-7278 for a free replacement.
FOR YOUR OWN SAFETY
1. READ AND UNDERSTAND
INSTRUCTION MANUAL
BEFORE OPERATING AIR
CLEANER.
2. To reduce the risk of injury,
disconnect from power supply
before servicing or changing
filters.
3. When ceiling mounted,
install Air Cleaner at least 7
feet above floor.
4. If used, ceiling mounts must
be anchored to building
structure. Never secure
mounts to dry wall, drop
ceiling tile/frame or other
non-structural members.
5. To reduce the risk of electrical
shock, do not expose to water
or rain.
6. Use only for the collection of
dry airborne dust. Never duct
the Air Cleaner directly to a
machine. Never use the Air
Cleaner to dissipate fumes
or smoke.

SERvICE ANd REPAIRS

All quality tools will eventually require servicing and/or replacement of parts. For information
about DELTA
Power Equipment Corporation, its factory-owned branches, or to locate an
®
Authorized Warranty Service Center, visit our website at www.deltaMachinery.com/service
or call our Customer Care Center at 1-800-223-7278. All repairs made by our service centers are fully
guaranteed against defective material and workmanship. We cannot guarantee repairs made or attempted by
others. By calling this number you can also find answers to most frequently asked questions 24 hours/day.
You can also write to us for information at DELTA
Jackson, TN 38305 - Attention: Technical Service Manager. Be sure to include all of the information shown
on the nameplate of your tool (model number, type, serial number, date code, etc.)
PARA SU PROPIA SEGURIDAD
1. LEA Y ENTIENDA EL MANUAL DE
INSTRUCCIONES ANTES DE
OPERAR EL LIMPIADOR DE AIRE.
2. Desconecte la unidad de la fuente
de energía antes de renidar
servicio o cambiar filtros para
reducir el riesgo de lesionamiento.
3. Instale el Limpiador de Aire por lo
menos 213 cm sobre el nievel del
piso cuando se trate de una
instalación de techno.
4. De utilizarse, los montajes de
techno deben anclarse a la
estructura del edificio. Jamás
afiance los mentajes al muro en
seco, lozas o marcos de platones
u otros miembros no estructurales.
5. No exponga la unidad al agua ni
la lluvia para reducir el riesgo de
choques eléctricos.
6. Utilice la unidad soló para la
recolección de polvo aéreo seco.
Jamás conduzca el Limpiador de
Aire directamente a una máquina.
Jamás utilice el Limplador de Aire
para disipar emanaciones o humo.
410-09-752-0017
To reduce risk of injury from moving parts, unplug before
servicing. Keep hands away from moving parts. Only
operate with air filters installed.
Desenchute la máquina antes de rendir servicio para
reducir el riesgo de lesionamientos ocasionados por
piezas en movimiento. Aleje las manos de las piezas
en movimiento. Opere solo con los filtros de aire
instalados.
Power Equipment Corporation, 4825 Highway 45 North,
®
11
410-09-752-0018

Publicité

Table des Matières
loading

Table des Matières