Safety Instructions; Descaling Chemicals - MOULDPRO DP 15 A 220V Notice D'utilisation Et Entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

6 - SAFETY INSTRUCTIONS

- Avoid using the pump in rooms where there are liquids, gases, flammable powders or with risk of
explosion.
- Before plugging in the pump to the outlet, make sure the switch is off.
- The outlet must be suitable for the plug of the pump. Do not use non CE-marked defective outlets.
- Use (CE) approved extensions, only if necessary.
- Do not use plug adapter. Do not carry out any modifications to the plug nor to the electrical cable.
- Pump shall always kept in perfect efficiency.
- During maintenance operations, check the switch is off and the plug is not connected.
- All maintenance operations must be carried out by the authorized Technical Assistance Service.
- Only use MOULDPRO original spare parts.
- Do not carry out any modifications to the pump if not authorized by MOULDPRO Technical
Department (ask for written authorization).
- Keep children and unauthorized persons away from the pump.
- Keep the pump out of reach of children and unauthorized persons.
- Do not use the pump if tired or under the effect of alcohol, medicines or drugs.
- When using the pump, wear overalls, do not wear jewellery, keep hair away from the pump.
- When handling descaling liquids, be very careful. It is necessary to use Individual Protection
Equipment (IPE).
7 - CHEMICALS

DESCALING CHEMICALS

REMOVER LIQUID
Concentrated descaling liquid
with powerful reaction for
systems and heat exchangers.
REMOVER PLUS LIQUID
Concentrated descaling liquid
(non-fuming), with degreasing
action, for systems and heat
exchangers.
REMOVER PLUS POWDER
Concentrated descaling powder
(non-corrosive, non-fuming) for
systems and heat exchangers.
NEUTRALIZING CHEMICALS
NEUTRALIZER
Neutralizing powder to remove
residual acidity after descaling
systems and heat exchangers.
Also suitable for neutralizing
descaling chemicals after use,
thus making it possible to
drain them.
8
Copper
Steel
Stainless Aluminium
steel
Brass
Tin
Light
Galvanised
alloys
iron

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Dp 15 a 110vDp 30 a 220vDp15aDp30a

Table des Matières