Technical Features; Customer Service; Use - MOULDPRO DP 15 A 220V Notice D'utilisation Et Entretien

3 - TECHNICAL FEATURES

DP 15 A 220V - DP 15 A 110V
Vertical axis pump
Motor DP 15 A 220V
Motor DP 15 A 110V
Degree of protection
Max. temperature
Flow rate
Head
Fittings
Tank capacity
Dimensions ø x H
Weight
* Data referred to the pump body outlet.

4 - CUSTOMER SERVICE

For enquiries on spare parts, please specify serial number of pump (shown on product and
carton).

5 - USE

5.1 - HOW TO PREPARE THE PUMP AND CHECK THE SEAL
- Fill the tank with enough water to ensure that the pump rotor
housing is submerged during operation.
- Screw the outer ends of the flexible hoses securely to the
exchanger to be descaled.
- Connect the power cable to a single-phase 220V or 110V
power supply.
- Switch on the pump and check the seal of the hose fittings
on the exchanger and on the pump. In case of leaks of
liquid, check hoses and fittings and replace the defective
components, if necessary.
- When seal is safe, switch off the pump.
- If necessary, add more descaling product by referring to the
dilution specified in the data sheet of the product.
6
DP 30 A 220V
Vertical axis pump
220 V - Hp 0,17
Motor DP 30 A 220V
110 V - Hp 0,17
Degree of protection
IP 54
Max. temperature
50° C
Flow rate
40* l/min.
Head
10* m
Fittings
1/2"
Tank capacity
15 l
Dimensions ø x H
35 x 48 cm
Weight
Kg 6
220 V - Hp 0,45
IP 54
50° C
90* l/min.
20* m
1/2"
24 l
40 x 63 cm
Kg 10,5