Preliminary Inspection - MOULDPRO DP 15 A 220V Notice D'utilisation Et Entretien

Dear Customer, thank you for choosing a MOULDPRO descaling pump.
MANUAL
This manual is a safe guide for the use of the pump. Please read it carefully in all its parts before use.
This manual contains important information for the proper working and use of the equipment.
MOULDPRO reserve the right to introduce any future changes without notice or replacement.

PRELIMINARY INSPECTION

Upon receipt of the pump, take it out from the carton and check it is in perfect condition. Also check
that the data on the rating plate correspond to required ones. For any problem, immediately contact
the supplier specifying the kind of fault.
In case of doubts about the safety of the machine, do not use it.
DESCRIPTION
The pumps DP 15 A 220V, DP 15 A 110V and DP 30 A 220V are fitted with programmable automatic
flow reverser. Particularly recommended for difficult descaling treatments, they work in complete safety
and autonomy enabling the operator to carry out other works at the same time.
Vertical axis pumps with tank for descaling boilers by using specific non-acid restoring products.
The pumps are equipped with special fittings and valves to adjust the flows and purge the sludge, built
up by the operation, which is then rapidly removed.
Pumps are supplied ready to use, in strong carton boxes with related user's manual.
Below are the main deposits which can be removed with these pumps:
- Scale deposits
- Calcium and silica deposits.
3