Stereo - Harman AKG B23 L Mode D'emploi

Application

STEREO

22
6) Play the instrument.
7) Set the VOLUME control (5) of the inputs in such a
way that the CLIP LEDs (3) occasionally light up
shortly.
For stereo recording with two microphones or a
microphone and instrument, the B23 L battery power
supply unit is preconfigured to "STEREO":
1) connect two microphones or a microphone and an
instrument to the B23 L.

Plug the mini XLR plug on the cable of your
microphone to an audio input jack (1).

Insert the jack connector plug of the MKG L
guitar cable (optional accessories) into the
output jack of your instrument and the guitar
cable's mini XLR plug into the audio input
jack on the B23 L.
2) Connect the B23 L with a pocket transmitter, mixer or
recording device over the output jack (2).
3) Set the selector switch (4) of both inputs to "MIC".
4) Set the selector switch (6) to "STEREO".
5) Switch on the B23 L using the ON/OFF switch (7).
6) Sing into the microphone or play into the instrument.
7) Set the VOLUME control (5) of the inputs in such a
way that the CLIP LEDs (3) occasionally light up
shortly.
B23 L