Connect Microphones - Harman AKG B23 L Mode D'emploi

Setting up

Connect microphones

ATTENTION
20
The unit has been designed for use with the
AKG MicroMic II "C... L" & "C... ML" Microphone Series.
If you would like to connect microphones from other
manufacturers to the unit, please note that you many have
to replace the connector plug of your microphone with a 3
pole mini XLR plug.
Contact assignment of the audio input plug:
Contact 1: Shielding
Contact 2: Audio in-phase (+)
Contact 3: Supply voltage
At contact 3, there is a positive voltage supply of 9 V (idle)
available for condenser microphones.
Proper functioning of the B23 L with products from other
manufacturers cannot be guaranteed. Potential damage due
to the operation using products from other manufacturers
shall be excluded from the guarantee.
B23 L