Limitation Of Liability; Safety Guidelines - Burg Wächter WATER 2060 Notice D'installation Et D'utilisation Succincte

Installation & Notice
1. Remove the battery insulative strip.
2. Before you install, set the sensor to the
base using the app and test the function,
see "Pairing sensor with Base".
3. Attach the sensor in a height on which
the alarm shall be triggered.
4. Attach the sensor above afterwards.
5. Avoid installing on metallic surfaces and
near live cables.
6. If the status LED is permanently lit, please
change the battery. Do not use batteries.
7. Ensure that the distance between the
magnet and the detector is significantly
less than 1cm. If you have aluminum or
metal frames / doors, please test before
installation whether the function works
reliably in the desired position
General safety precautions
and safety instructions
Attention
Any changes or modifications to this
appliance which have not been explicity
approved of by the respective regulatory
authority, may lead to a prohibition of
usage of this appliance.

Limitation of liability

This device complies with the technical
standards in force at the time of production.
We constantly strive to ensure that our
products are technologically cutting edge
and that our handbooks are kept up to date.
We therefore reserve the right to undertake
technical changes and modifications or
adjustments to the instructions without
providing advance notice.
The instructions must be carefully followed.
We accept no liability for damage, as a result
of e.g. incorrect use or installation, improper
10 | English
BURGprotect_WATER2060_03-2019.indd 10
handling, insufficient or poor maintenance,
disregard of safety guidelines or general
conditions of use.
When installed and used correctly and under
the conditions specified, this device performs
the functions described in the handbook.
As the alarm is dependent upon the specific
arrangement put in place by the customer,
there is no guarantee that it will be triggered.

Safety guidelines

Please read the instructions carefully.
No liability can be assumed for any damage
which may result from failure to follow
instructions.
The device must be used only for the
purpose specified in the instructions. The
device should work effectively as an alarm
in an emergency! Please check regularly that
the device is in working order and that the
batteries are charged. This will ensure that
it functions correctly in the event of
a (hopefully unlikely) emergency.
The device may malfunction when exposed
to unexpectedly high electromagnetic
radiation, manipulation or other influences.
The device must not be installed in damp
areas or near electrical devices which emit
radiation.
Battery-operated devices must not be used
in high temperatures, near sources of heat
or exposed to direct sunlight.
Ensure that packaging and contents are kept
well away from children to avoid any risk
of suffocation.
Please keep instructions in a safe place.
IMPORTANT NOTE: The device may
not function correctly if installed in
an inappropriate location.
If you require an EC Declaration on
Conformity for this device for this device,
please send a request to: info@burg.biz
WATER 2060
09.04.2019 11:54:0